3 OF 6
IG102918-6.0
HYDROLUME
®
INSTALLATION GUIDE
Note: HYDROLUME LED Strip Light may be connected from either end
with compatible accessories.
a
CREATE HYDROLUME SLIM STRIP LIGHT
CONNECTIONS
5
INSERT HYDROLUME LED STRIP LIGHT INTO CONNECTOR
b
CRIMP CONNECTOR TO TAPE LIGHT
Using a pair of pliers, apply even pressure to top and bottom
of connector until it is securely fastened to strip light.
INSTALLATION (CONT.)
*For use with Cable Jumper, Splice, I, L, T, and X-Connectors.
6
SEAL END OF HYDROLUME LED STRIP LIGHT
All ends of HYDROLUME LED Strip Light must be sealed with
non-
acidic neutral silicone adhesive/sealant
(Diode SKU: DI-WPSL
not included
) and HYDROLUME end caps. Acidic adhesive may
damage the phosphor of LED Chips
a
Neutral Silicone adhesive/sealant
(non-acidic)
b
Slide end cap onto HYDROLUME Strip Light.
ADD NON-ACIDIC NEUTRAL SILICONE ADHESIVE TO END CAP
SECURE END CAP ONTO HYDROLUME LED STRIP LIGHT
Note: HYDROLUME
®
connectors are single use only.
Once secured,
DO NOT remove connector.
If connector comes loose, it must be replaced. Contact
Diode LED for assistance.
