3 Configurations on Web Interface
SBC1000 Session Border Controller
Copyright©2011-2018 Dinstar
56
Figure 3-39 Add VLAN
Table 3-30 Network Configuration
VLAN ID
The ID of the added VLAN
Interface
Network port: Admin, GE0, GE1, GE2 and GE3
MTU
The MTU (Maximum Transmission Unit) of the network port
Priority
When SBC1000 visits an IP address of other network segment and this peer IP
address is not directed by static route, SBC1000 will go out from the network port
or VLAN with the highest priority. The smaller digit, the higher priority.
Network Mode
The way for network port (Admin, GE0, GE1, GE2 and GE3) to get its IP address.
Currently, SBC1000 only supports static IP address.
IP address
The IP address of network port or VLAN
Mask
The subnet mask of network port or VLAN
Gateway
The gateway of network port or VLAN
DNS Server
The address of DNS server of network port or VLAN
Port Mapping
To ensure the security of the LAN (local-area network), SBC1000 will reject the connection request from the wide-
area network (WAN). Port mapping allows a client in the wide-area network to visit the SBC1000 device in the
local-area network.
