3 Configurations on Web Interface
SBC1000 Session Border Controller
Copyright©2011-2018 Dinstar
31
Figure 3-22 Configure SIP Header Manipulation Rule
Table 3-20 SIP Header Manipulation
Name
The name of the SIP header manipulation rule. It cannot be modified after the SIP header
manipulation rule has been added successfully
Description
The description of the SIP header manipulation rule
Type
Request: The manipulation rule is only applied to SIP request messages;
Response: The manipulation rule is only applied to SIP response messages;
List: The manipulation rule is only applied to those SIP request and response messages that
are selected
Operation
The operation rule will be applied when the set condition is met. For example, when the set
value meets the source ID in Request Line, the actions(add, modify or remove) will be
conducted on the destination ID.
Name
: the name of the operation rule.
Description
: the description of the operation rule.
Type
: the content type where the operation rule will be applied.
Request-line: the content of the request line of SIP message.
Status-line: the content of the status line of SIP message.
Header: the content of the header of SIP message.
Condition
: the set condition for the operation rule. When the set value matches the source
ID, the operation rule will be activated.
Source ID
: the original content of SIP message, it can be any parameter included in SIP
message.
Match
: equal
when the source ID is equal to the set value, the operation rule is activate.
