Dinolift DINO 260XT, Руководство по эксплуатации, Страница: 57 / 101

DINO 260XT
57
DAILY INSPECTION (START-UP INSPECTION)
To be always performed at a new work site and in the beginning of every working day. The
inspection is performed by the user. In the inspection attention shall be paid to the following issues:
-
establish the load-bearing capacity of the ground at the lifting site (see the table "maximum
permissible ground pressure for different soil materials" on page 19 for guidelines)
-
verify the standing stability of the lift
-
control the due operation of the position indicator
-
test the operation of the emergency stop system both from the platform and the chassis control panels.
-
test the operation of the emergency descent system both from the platform and the chassis control
panels
-
test the alarm signal
-
check the warning and signal lights
-
check the operation and cleanliness of the lights and reflectors
-
check the condition of the operating controls and test all work movements
-
check the condition of the access routes, the platform gate and the handrails
-
check the operation of the load limit switches (refer to the service instructions).
-
check the limit switches, which prevent the operation of the boom movements (refer to the service
instructions)
-
check the operation of the limit switches, which block the outrigger movements (refer to the service
instructions).
-
check the hydraulic system for tightness
-
test the brakes
-
check the unit visually
-
observe the location of the nearby power lines (refer to the safety distances on page 9)