Dinolift DINO 260XT, Руководство по эксплуатации

Страница: 28 / 101

DINO 260XT
28
19. When moving the platform, remember the following
-
be careful of the high voltage power lines
-
do not exceed the max. allowed lateral force (400N)
-
do not touch open electric wires
-
do not throw objects from the platform
-
do not damage the lift
-
do not take additional load in the upper position
-
do not damage other devices
-
do not load the platform vertically more than what is allowed
20. When leaving the lift
-
drive the lift to a safe position, preferably to the transport
position
-
switch off the power unit
-
prevent unauthorized use of the lift by locking the control centre cover
21. Adjustment of the platform position
The position of the platform may be adjusted from the chassis control panel in the following way:
-
turn the selector switch (1) to position 3 (page 22)
-
select the correction movement direction with the control lever (32)
No persons allowed on the platform during adjustment.
The levelling of the platform from the platform control panel:
-
turn the selector switch (1) to position 2 (page 22)
-
depress the pushbutton 30A for levelling of the platform and select the desired direction using the
lever 30B (page 24)
-
.Operate the controls simultaneously.
Carry out the adjustment while the boom is in the horizontal position.
Carry out the levelling of the platform while the lift is in the support position (the outriggers down).
BE PREPARED FOR SUDDEN PLATFORM MOVEMENTS!