Dinli DL-901, Руководство по обслуживанию

Страница: 77 / 136

【
6-20
】
ENGINE
●
Apply TB #1316 to M6 Stepped bolt threads, and fix Stopper
Arm CP and Spring (Stopper) with M6 Stepped bolt.
Tightening Torque: 9 - 11 N-m
Fastener : M6 Stepped bolt 1 pc
.
Note:
Make sure the Spring (Stopper) orientation.
Assembly Oil Pump Assy. as shown in the illustration in
advance.
(1) Oil Pump Case 1
(2) Oil Pump Case 2
(3) Inner Rotor (Feed)
(4) Outer Rotor (Feed)
(5) Inner Rotor (Scavenge)
(6) Outer Rotor (Scavenge)
(7) Oil Pump Shaft
(8) Dowel Pin; 2 pcs.
●
Insert shorter pin ( 3 X 15L) into the hole of Oil Pump Shaft,
and then assemble with Inner Rotor (Scavenge).
●
Set Pump Case 1 into Oil Pump Shaft.
●
Insert another shorter pin ( 3 X 15L) into the hole of Oil
Pump Shaft.
●
Assemble Outer Rotor (Feed) and Inner Rotor (Feed) with
Pump Case 2, and apply oil into rotor chamber.
●
Set Oil Pump Shaft into Pump Case 2, fix Case 1 and 2 with
two longer pins ( 3 X 19.8L).
●
Fit Outer Rotor (Scavenge).
●
Install Oil Pump Assy.
Tightening Torque: 9 - 11 N-m
Fastener : M6 X 30L 3 pcs.
Note:
Make sure the smooth rotation of Oil Pump shaft.