Dinli DL-901, Руководство по обслуживанию

Страница: 44 / 136

【
4-5
】
SUSPENSION/STEERING
Swingarm Bearing Installation
●
Lubricate the swingarm bearing before installation (see
swingarm bearing Lubrication).
●
Use the bearing driver set to press in the tapered roller
bearing outer races and grease seals.
Swingarm Bearing Inspection
●
Move the swingarm up and down to check for abnormal
friction, and push and pull it back and forth to check for
bearing play.
If abnormal friction is felt, the bearings are damaged.
★
Replace the grease seals and both left and right bearing.
●
The play developed during use may indicated bearing
damage. In this case, remove the swingarm and inspect the
bearings. Replace both left and right bearings, if one of the
bearing is damaged.
Swingarm Bearing Lubrication
●
Remove the swingarm.
●
Using a high flash-point solvent, wash the bearings clean of
grease, and dry them.
●
Inspect the bearings and grease seals for abrasion, color
change, or other damage.
●
Apply grease to the outer races, and pack the tapered roller
bearing with the same grease.
●
Apply grease to the inside of the grease seals.