Dini Argeo DGT1P, Руководство пользователя

Страница: 33 / 52

33
Optimized layout for A4 print.
f.mode
A
888888
Setup B ConfiG pre.Cal
deCi 2
u.m. 2
div 2
1 1
1
2
3
Unit 2 6
888888 F.mode
C
funCt viss
1 1
peak
alibi
Conver
none
2
4
3
5
viss
peak
conver
alibi
TECH_MAN_ENG_DGT1P
LEGEND:
Indicates repeated pressing of
the
key.
Parameter visible only
under certain conditions. Parameter or menu subject
to approval.
Default value of the parameter.
Use functions
Converting units of measurement
Peak detection
High resolution
Alibi memory
Weight display in high resolution (x10). Press the key to activate or deactivate the function.
When the weight is displayed in high resolution, the light is lit.
In the case of an approved transmitter, the high-resolution weight display is automatically deactivated after 5 seconds.
Detection of the maximum weight value during a time interval. Press the key to activate the function. The display shows
“
-peak- ” every 5 sec and the transmitter shows the maximum weight reached since the function was activated.
To deactivate the function press the again, the display shows “ peakof ” for a moment and shows the instantaneous
weight again.
By holding down the
key it is possible to select in the piC.tim parameter the minimum time of the pulse duration,
expressed in hundredths of a second. The lower this value, the higher the peak function sensitivity.
Converting the scale unit of measurement. Press the key to convert the weight to pounds. By holding down the key,
you can enter a free conversion factor, which will be multiplied by the weight.
Example: To make the instrument convert kg → m
3
of water, enter the value 0.997 as conversion factor. The key can be
used to switch from the main unit of measurement to the secondary unit at any time.
When the secondary unit of measurement is displayed, the light is lit. The display of the secondary unit of measure
can be configured in the parameter
UNIT 2 :
(See section “Alibi memory” page 43 ).
Not visible if TYPE = IND.CH and N.CHAN > 1 .
No function
Second unit decimals.
Second unit of measure ( LB / Custom ).
Second unit division.