Dini Argeo DGT1P, Руководство пользователя, Страница: 29 / 52

29
Optimized layout for A4 print.
DISAB
loCk
ENAB
unloCK
Disab
888888
888888
F.mode
F.mode
A
A
funCt
funCt
1
1
rs.zero
tare
5
5
TECH_MAN_ENG_DGT1P
LEGEND:
Indicates repeated pressing of
the
key.
Parameter visible only
under certain conditions. Parameter or menu subject
to approval.
Default value of the parameter.
By pressing the key, or sending the zero command, the transmitter zeroes the gross weight on the scale. For a moment the display
shows “
zero ” and then it shows 0 (gross weight).
The semi-automatic zeroing cannot be performed if:
•
The weight on the scale is greater than the zero capacity ( 0.perC ).
• The weight is unstable (except for zeroing via the ZEROI command).
Restoring zero
Semi-automatic zeroing
Zero restoring disabled.
Zero restoring enabled.
• If
auto.0 = disab :
The last zero in the memory before turning off the power is always
restored.
• If
auto.0 = enab :
If the auto-zeroing fail, the last zero in the memory before turning off
the power is restored.
Tare functions and parameters
Tare blocked. When the gross weight drops to 0, the tare remains
engaged.
Tare unlocked. When the gross weight drops to 0, the tare is cleared.
Tare functions disabled.
Tare mode
Semi-automatic tare
By pressing the key, or sending the tare command, the transmitter sets as tare the weight on the scale. For a moment the display shows
“
tare ” and then it shows 0 (net weight). The light indicates that the net weight is shown on the display.
The semi-automatic tare cannot be performed if:
•
The weight is less than one division.
• The weight is overloaded.