Dini Argeo DGT1P, Руководство пользователя

Страница: 28 / 52

28
Optimized layout for A4 print.
888888
f.mode
A
888888
Setup
B
ConfiG Pre.Cal
param stabil
auto.0
0.traCk
0-perC
1 1
2 1
2
4
3
C.perC
disab
enab 1
1
2
tr 10
tr 8
tr 6
tr 4
tr 2
tr 1
tr1/2
tr1/4
TR no
1
2
3
4
5
6
7
8
9
i
auto.0
2
0-perc
3
0.traCk 4
TECH_MAN_ENG_DGT1P
MENU ACCESS: SAVING THE PARAMETERS:
Press the key during the start-
up procedure.
Press the key several times, until the display shows
SAVE?
. Press the key to confirm.
Complete menu
on pages
24 - 25
Reset functions and parameters
Indicates the weight value that can be zeroed by key or command.
The value is expressed as % of the full scale. For example: if the scale has a full scale
(
RANGE1 ) of 1000 kg, by setting 3% it is possible to zero up to 30 kg.
The value 0 disables the ZERO key and the zeroing commands.
Disabled.
% auto-zeroing on start-up.
% manual zeroing.
Zero tracking.
Enabled, enter in C.PERC the maximum zeroable value
expressed in % of the capacity.
Maximum percentage of manual zeroing
Auto-zeroing on start-up
from 0 to 50%.
from 0 to 10%.
from 0 to 50%.
from 0 to 2%.
= 2%.
10 divisions.
8 divisions.
6 divisions.
4 divisions.
2 divisions.
1 division.
1/2 division.
1/4 division.
Tracking disabled.
This menu allows to set zero tracking, i.e. the compensation parameter of the thermal drift of the scale; the set value corresponds to
the number of divisions that is reset to zero in the fixed time of 1 second.
Zero tracking
In the case of an approved transmitter, it is possible to select the values tr1/2 , tr1/4 , tr no .