Operator’s Manual
Tilt-back Operation Instructions
GTWY1200 SERIES 21
Tilt-back Operation Instructions
Observe and obey:
The retaining pin must be inserted to
prevent the spring-loaded tilt-back frame from
dropping.
Do not tilt the machine back unless the
area is clear of personnel and obstructions.
Do not stand behind or under the tilt-back
frame when raising or lowering it.
Tilt-back Frame
The Dingli GTWY1200 Series has a tilt-back
frame when height over 2m, which allows the
machine to roll through a standard doorway.
The tilt-back frame is standard equipment on
standard base and GTWY14-1200models, and
optional on standard base GTWY8-1200
GTWY10-1200 and GTWY12-1200 models.
Tilting Instructions
The number of people required for tilt-back
and set-up a machine is dependent on a
number of factors, including but not limited to:
●
the physical condition, strength and
disabilities or prior injuries of the people
involved
●
the vertical and horizontal distances the
machine has to be moved
●
the number of times the machine will be
tilted or set-up
●
the stance, posture and grip used by the
people involved
●
the lifting techniques used
●
the site conditions and weather in which the
activity is being performed (i.e., slippery, icy,
raining)
The appropriate number of people and proper
lifting techniques must be used to prevent
physical injury.
Lowering the Tilt-back
Assembly
1. Be sure the area behind the machine and
under the tilt-back frame is clear of
personnel and obstructions.
2. Fully lower the platform.
3. Turn the outriggers in
and place them in the
storage station.
The tilt-back frame is
spring loaded and will
immediately fall outward
