Operator’s Manual
Transport Instructions
GTWY1200 SERIES 19
a.stop bracket b.loading pivot
All models with tilt-back frame
7. Hook the loading pivot to the stop bracket.
8. Position the machine flush against the
loading surface. Lower and lock the stop
bracket to the lowest lock pin position
above the loading surface.
All models with tilt-back frame:
9. Be sure both stop bracket lock pins are
fully locked. Be sure both tilt-back frame
swivel casters are locked.
10. Slide out the T-handle until the lock pin
snaps into place.
11. Lift the T-handle to tilt the machine onto
the loading surface. Use the appropriate
number of people and proper lifting
techniques.
12. Carefully push the machine into the
transport position.
13. Return the sliding T-handle to the stowed
position.
14. Secure the machine base and mast to the
transport vehicle. See Securing the
Machine following.
15. Reverse this procedure to unload the
machine.
Securing the Machine
Use chains or straps of ample load capacity.
Use a minimum of 2 chains. Adjust the rigging
to prevent damage to the chains.
