PDU–4xx–W
©
Dinel, s.r.o.
6
6 . Mechanical mounting
Read the basic safety requirements prior to starting the installation.
Ensure that the power supply network voltage corresponds to the nominal voltage stated
on the unit’s identification label.
The load must correspond to the requirements listed in the technical data.
All installation works must be conducted with a disconnected power supply.
Protecting the power supply connections against unauthorized persons must be taken into
consideration.
The unit is designed for mounting inside housings (control panel, switchboard) insuring
appropriate protection against surges and interference. Metal housings must be connected
to ground in a way that complies with the governing regulations.
Disconnect the power supply prior to starting assembly.
Check the connections are wired correctly prior to switching the unit on.
The unit is fixed using 4 wall-mounted screws.
Fig. 1: Method of connecting cables to the clamping connectors
