Dimplex WI 14 ME, Инструкция по установке и эксплуатации

Страница: 24 / 52

EN-10 452232.66.17 · FD 9402 www.dimplex.de
English
WI 9ME - WI 14ME
12 Device Information
1 Type and order code
WI 9ME WI 14ME
2 Design
2.1 Degree of protection according to EN 60 529 IP 20 IP 20
2.2 Installation Location Indoors Indoors
3 Performance data
EN 255 EN 14511 EN 255 EN 14511
3.1 Operating temperature limits:
Heating water flow °C Up to 55 Up to 55
Cold water (heat source) ° C +7 to +25 +7 to +25
3.2 Temperature spread of heating waterat W10 / W35 K 9.5 5.0 8.8 5.0
3.3 Heat output / COP at W7 / W55
1
kW / ---
1. This data indicates the size and capacity of the system. For an analysis of the economic and energy efficiency of the system, both the bivalence point and the regulation should
also be taken into consideration. The specified values, e.g. W10 / W55, have the following meaning: Heat source temperature 10 °C and heating water flow temperature 55 °C.
6.9 / 2.5 12.2 / 2.3
at W10 / W50
1
kW / ---
7.7 / 3.2 13.4 / 3.4
at W10 / W45
1
kW / ---
7.7/ 3.7 13.4 / 3.8
at W10 / W35
1
kW / ---
8.3 / 5.1 8.2 / 4.8 13.6 / 5.0 13.5 / 4.7
3.4 Heating water flow with an internal pressure differential of m³/h / Pa 0.75 / 7000 1.4 / 24000 1.3 / 7000 2.3 / 22000
3.5 Cold water flow rate at an internal pressure differential of
(heat source)
m³/h / Pa
2.0 / 6200 3.3 / 19000
3.6 Refrigerant / total filling weight type / kg R407C / 1.7 R407C / 1.9
3.7 Lubricant / total filling weight type / litres Polyolester (POE) / 1.0 FV68S / 1.7
4 Dimensions / connections and weight
4.1 Device dimensions without connections
2
H x W x L mm
2. Note that additional space is required for pipe connections, operation and maintenance.
1445 x 650 x 575 1445 x 650 x 575
4.2 Device connections to heating system Inch G 1¼" external G 1¼" external
4.3 Device connections to heat source Inch G 1¼" external G 1¼" external
4.4 Weight of the transportable unit(s) incl. packing kg 156 165
5 Electrical Connection
5.1 Nominal voltage / fuse protection V / A 230 / 16 230 / 25
5.2 Nominal power consumption
1
W10 W35 kW
1.62 1.69 2.72 2.87
5.3 Starting current with soft starter A 26 45
5.4 Nominal current W10 W35 / cos

A / --- 0.8 9.18 14.8 16.6
6 Complies with the European safety regulations
3
3. See CE declaration of conformity
3
7 Additional model features
7.1 Water in device protected against freezing
4
4. The heat circulating pump and the heat pump manager must always be ready for operation.
Yes Yes
7.2 Performance levels 1 1
7.3 Controller internal/external Internal Internal