Dimplex LA 14PMS, Инструкция по установке и эксплуатации

Страница: 20 / 44

EN-8
English
11
11 Device Information
1 Type and order code
LA 14PMS
2 Design
2.1 Controller, external External
2.2 Thermal energy metering ---
2.3 Installation location / degree of protection according to EN 60 529 Outdoor / IP 24
2.4 Frost protection condensate tray / heating water
1
1. The heat circulating pump and the heat pump controller must always be ready for operation.
Heated / yes
2.5 Performance levels 2
3 Operating limits
3.1 Heating water flow
2
/ return °C
2. At air inlet temperatures of -25 °C to -10 °C flow temperature rising from 50 °C to 65 °C
up to 65 ± 2 / from 18
3.2 Air (heat source) °C -25 to +35
4 Performance data / flow rate
3
3. These data indicate the size and capacity of the system according to EN 14511. For an analysis of the economic and energy efficiency of the system, the bivalence point and
regulation should be taken into consideration. These specifications can only be achieved with clean heat exchangers. Information on maintenance, start-up and operation can be
found in the respective sections of the installation and operating instructions.
The specified values have the following meaning, e.g. A7 / W35: Heat source temperature 7 °C and heating water flow temperature 35 °C.
4.1 Heating water flow rate / internal pressure differential
maximum m³/h / Pa 2.4 / 10100
minimum m³/h / Pa 1.0 / 3200
4.2 Heat output / COP
4
4. With minimum heating water flow.
EN 14511
at A7 / W35 kW / --- 8.0 / 2.5
kW / --- 4.0 / 2.0
at A2 / W35 kW / --- 10.2 / 3.1
kW / --- 5.8 / 2.9
at A7 / W35 kW / --- 13.3 / 3.6
kW / --- 7.4 / 3.7
at A7 / W55 kW / --- 11.7 / 2.8
kW / --- 6.3 / 2.6
at A10 / W35 kW / --- 14.5 / 3.9
kW / --- 8.1 / 4.0
4.3 Sound power level according to EN 12102 dB(A) 63
4.4 Sound pressure level at a distance of 10 m
(air outlet side)
5
dB(A)
5. The specified sound pressure levels correspond to the operating noise of the heat pump in heating operation with a flow temperature of 35 °C.
35
4.5 Air flow m³/h 4500
5 Dimensions; weight and filling quantities
5.1 Device dimensions without connections
6
H x W x L cm
6. Note that additional space is required for pipe connections, operation and maintenance.
1571 x 852 x 1552
5.2 Device connections for heating system Inches R 1 1/4"
5.3 Weight of the transportable unit(s) incl. packaging kg 256
5.4 Refrigerant; total filling weight type / kg R290 / 1.8
5.5 Lubricant; total filling quantity type / litres Alkyl benzene (AB) / 1.9
6 Electrical connection
6.1 Supply voltage; fuse protection V / A 1~ / N / PE 230V (50Hz) / C32A
6.2 Starting current with soft starter A 28
6.3 Nominal power consumption at A2/W35 /
max. power consumption
3
kW
3.3 / 6.0
6.4 Nominal current at A2 / W35 / cos
ϕ
A / --- 18.0 / 0.8
6.5 Max. power consumption of compressor protection
(per compressor)
W
---
7 Complies with the European safety regulations
7
7. See CE declaration of conformity
8 Additional model features
8.1 Type of defrosting Hot gas
8.2 Max. operating overpressure (heat sink) bar 3.0