Dimensions Unlimited
3
Safety Instructions
Important:
Read this manual before installation, it contains important safety,
installation, and operating instructions. Save this manual and keep it in a safe place.
1.1 Warning and Danger Symbols:
To reduce the risk of electrical shock and to ensure the safe operation of your
Dimensions power inverter, the following symbols are used throughout the manual.
ATTENTION:
Important operating instructions.
Follow them closely.
DANGER:
Risk of personal harm and/or
electrocution exists in this area.
Use extreme caution.
SAFETY CERTIFICATION:
This is a UL and CUL Certified product that complies with all the safety
standards required in the USA and Canada for land vehicle inverters.
1.2 Standby Power System Precautions:
•
Standby Power Systems produce hazardous voltages. To avoid risk of harm or fire,
the unit must be properly installed.
•
There are no user serviceable parts inside, do not remove the cover.
•
The Standby Power Systems should not be mounted in a location that may be
exposed to rain or spray.
•
The Standby Power Systems should not be installed in a zero clearance enclosure.
•
Damage to the Standby Power Systems will occur if correct polarity is not observed
when installing the DC input cables.
•
Damage to the Standby Power Systems will occur if an external AC power source is
applied to the inverter’s AC hardwire output.
•
The Standby Power Systems contains a circuit breaker and capacitor that may
produce a spark. Do not mount in a confined battery or gas compartment.
•
Be sure the Standby Power Systems is turned OFF during installation.
1.3 Battery Precautions:
•
Working in the vicinity of lead-acid batteries is dangerous. There is a risk of acid
exposure.
•
Batteries generate explosive gases during operation.
•
There is risk of high current discharge from shorting a battery that can cause fire
and explosion. Use insulated tools during installation.
•
Remove all rings, watches, jewelry or other conductive items before working near
the batteries.
•
Inspect the batteries once a year for cracks, leaks or swelling.
•
Dispose of the batteries according to local regulations. Do not incinerate batteries;
risk of explosion exists.
