Dimensions Unlimited
18
g)
This indicates that the charger is in the conditioning mode. Battery
conditioning is automatically performed every 10
th
complete charge cycles.
The display also indicates the battery voltage and the amount of DC charge
current flowing into the batteries. See tables II & III on page 15 for more
information.
h)
This message is displayed when you press the “
Inverter & Reset – On/Off”
button while the SPS is in the external power mode and the battery charger
is activated. It indicates that the inverter is OFF and will not automatically
turn ON when external power is removed. Pressing the button again will
result in message (j) below. This message will be displayed for ten seconds.
i)
This message is displayed when you press the
“Inverter & Reset – On/Off”
button while the inverter is OFF and there is no external power connected
to the SPS. Pressing this button again will turn the inverter ON and
message (a) will appear.
j)
This message is displayed when you press the “
Inverter & Reset – On/Off”
button while the SPS is in the external power mode and the battery charger
is activated. It indicates that the inverter will automatically turn ON when the
external power is removed. Pressing this button again will result in message
(h) above. This message will be displayed for ten seconds.
k)
This message is displayed when you press the
“Charger Draw – Set Input”
button. It indicates the battery charger input current limit setting. Pressing
this button again will decrease the current limit. This is explained in more
detail in section 7.1.3, page 16. This message will be displayed for ten
seconds.
INVERTER-OFF
PUSH FOR STANDBY
INVERT-STANDBY
OVERRIDE BY CHGR
CHGR- COND MODE
xx.x VOLT, xxx AMP
CHGR POWER DRAW
LIMIT xx AMP AC
INVERTER – OFF
PUSH FOR ON
