Digium, Inc.
Page 95
Chapter 3: Telephone System Configuration
There are also several message playback options which can be specified.
Say Message Caller-ID - The Say Message Caller ID option reads the
caller ID before the voice mail message is played.
Say Message Duration - If this option is enabled the duration of the
message, in minutes, will be played back before the voicemail mes-
sage is played.
Play Envelope - Turn on/off playing introductions about each mes-
sage when accessing them from the voicemail application.
Allow Users to Review - This option provides incoming callers the
option to review their message before it is saved and can be played
back by the owner of the voicemail extension. Standard options are
presented to the caller, allowing them to discard the message or re-
record it.
E-mail Settings
The E-mail Settings page is used to set e-mail options for voicemail, as
well as the format of the e-mails sent.
Note: SMTP settings must be specified in order to send e-mail.
Send Messages by E-mail Only - If this option is set, voicemail mes-
sages will only be accessible by e-mail.
Attach Recordings to E-Mail - This option is used to choose whether
voicemail is sent to a users e-mail address as an attachment. Click the
check box to enable this option. Messages will be sent in the .wav for-
mat.
Template for E-mails - The e-mail template gives you the ability to
specify the general content for each e-mail sent with a voicemail alert.
To load a sample template, click the Load Defaults button. Be sure to
change the From address to a valid e-mail address before saving.