Digium, Inc.
Page 119
Chapter 3: Telephone System Configuration
–
self / callee - Run the application on the same channel that activated
this feature. This feature will be accessible by the callee only.
–
peer / callee - Run the application on the opposite channel from the
one that has activated this feature. This feature will be accessible by
the callee only.
–
self / both - Refer to the description for self.
–
peer / both - Refer to the description for peer.
App Name - Select the application to execute once the defined key
sequence is detected.
Note: The application map feature is not intended to be used for all
Asterisk applications. Applications which are statically defined in
the extensions.conf are executed by the PBX core. In contrast,
applications which are dynamically called from an application map
are executed outside of the PBX core. It is not appropriate to use
any application which has any concept of dialplan flow when using
an application map. Examples of this would be applications such as
Macro, Goto, Background, and WaitExten.
Arguments - Specify the arguments to be passed to the application
defined in App Name.
Note: Enabling the application map feature will cause the Asterisk
Appliance 50 to remain in the media stream during all calls. This will
occur regardless of whether two endpoints are configured to redirect
their media stream from the Asterisk Appliance 50 to each other after
the call setup has completed (e.g. two SIP phones with reinvite
enabled).
Click Save when you are done configuring this section. Then click Apply
Changes to make these changes immediately available for new calls.