10
Manual configuration
1. As the BIOS boots press
Ctrl+S
or
F4
when prompted to enter the RAID BIOS.
2. At the next screen select
Create RAID Set
, then press
Enter
.
3. Select
RAID5
, then press
Enter
.
4. Select the number of drives then press
Enter
.
5. Select
Manual configuration
then press
Enter
.
6. Select chunk size from
8k, 16k, 32k, 64
or
128k
, then press
Enter
.
7. Select
the
first drive
, press
Enter
.
8. Select
the
second drive
, press
Enter
.
9. Select
the
third drive
, press
Enter
.
10. If applicable select the
4th
drive pressing enter after each selection.
11. Input the RAID size, press
Enter
.
12. When asked
Are You Sure(Y/N)?
, press
Y
to accept.
13. Press
Ctrl+E
to exit the BIOS.
14. When asked
Are you sure to exit(Y/N)?
,
press
Y
to exit and reboot.
15. Continue with FDISK and FORMAT steps as if you were installing a
conventional hard drive.