17
For An Existing Installation
1. Setup the RAID Array prior to driver installation and boot up to
Windows.
2. At
Found New Hardware Wizard
, select
Locate and install driver
software (recommended)
.
3. Please insert driver CD, click
Next
.
4. If the system prompts the user informing the drivers are not signed,
select the option
Install this driver software anyway
.
5. Click
Close
to complete the installation.
For Windows
®
Vista / Windows 7 -x64
For A New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the “
Driver\Windows driver\SIL3114_x64_15203\
” folder, found on the
driver CD, onto a blank floppy disk then follow the directions below.
1. Setup the RAID Array prior to Windows installation.
2. Follow Microsoft’s Windows installation procedure.
3. Restart the computer when prompted by Windows’ installation.
4. At the Windows Setup screen, press
Load Driver
to install the
RAID driver.
To Verify Windows
®
Installation
1. Right
click
My Computer
and click
Manage
.
2. Select
Device Manager
.
3. Double
click
SCSI and RAID Controller
, then double click
Silicon Image SiI 3114 SoftRaid 5 Controller
to display driver
properties. A message this device is working properly is displayed
in the dialog box, the driver has been correctly installed.
