6
RAID 1 (Mirror)
For New/Blank Hard Drives
1. As the BIOS boots press
Ctrl+S
or
F4
when prompted to enter the RAID BIOS.
2. At the next screen select
Create RAID Set
, then press
Enter
.
3. At the next screen select
RAID1
then press
Enter
.
4. Select
Auto configuration
, then press
Enter
.
5. Input the RAID size, press
Enter
.
6. When
asked
Are You Sure(Y/N)?
, press
Y
to accept.
7. Press
Ctrl+E
to exit the BIOS.
8. When
asked
Are you sure to exit(Y/N)?
,
press
Y
to exit and reboot.
9. Continue with FDISK and FORMAT steps as
if you were installing a conventional hard drive.
For Existing Hard Drives with Data
1. As the BIOS boots press
Ctrl+S
or
F4
when prompted to enter the RAID BIOS.
2. At the next screen select
Create RAID Set
, then press
Enter
.
3. At the next screen select
RAID1
then press
Enter
.
4. Select
Manual configuration
, then press
Enter
.
5. Select the
Source
drive, press
Enter
.
6. Select the
Target
drive, press
Enter
.
7. Select
Create with data copy
, then press
Enter
.
8. Select
online copy
, then press
Enter
.
Note:
Selecting
Online Copy
builds the mirror while in Windows.
Selecting
Offline Copy
builds the mirror before exiting the
RAID BIOS.
