USER’S GUIDE
NEC-FXE-xx-01, 100Base-FX Express Card
•
Full duplex design
•
Complies with Express Card Standard
• SC and LC multimode, and SC single mode fiber
connections
• Supports PXE remote boot
• RoHS compliance
The NEC-FXE-xx-01 fiber adapter NIC is a small size Express 100Base-FX Fiber Card,
which is specifically designed to plug into a notebook or desktop computer equipped
with an Express Card slot. This fiber adapter NIC fully complies with the IEEE
802.3u/x CSMA/CD 100Base-FX and the express card standards. It has a single LED
located on top of its plastic cover that indicates ‘link’ and ‘activity’ status.
The fiber adapter NIC supports Preboot Execution Environment (PXE) and Bootstrap
Protocol (BootP). Multi-Boot Agent (MBA) is a software module that allows your
networked system to boot with the images provide by the remote system over the
network.
*Typical maximum cable distance. Actual distance is dependent upon the physical
characteristics of the network installation.
Installation . . . . . . . . . . . . . . . . . . .2
Cable Specifications . . . . . . . . . . .4
Technical Specifications . . . . . . . .5
Troubleshooting . . . . . . . . . . . . . . .6
Contact Us . . . . . . . . . . . . . . . . . . .7
Part Number
Fiber Port
NEC-FXE-SC-01
SC 1300 nm multimode, 2km
(1.2 miles)
PXE boot included
*
NEC-FXE-LC-01
LC, 1300 nm multimode, 2km
(1.2 miles)
PXE boot included
*
NEC-FXE-SC20-01
SC, 1310 nm single mode, 20km
(12.4 miles)
PXE boot included*
