4 Ports USB 2.0 DVI KVM Switch with HUB and Audio User’s Manual
-
8
-
will see the system show up keyboard detected failed message, screen go to blank
for few minutes, then the login screen will come out.
Since Sun Micro system does not support multiple keyboard and mouse, please
make sure only one set of keyboard and mouse on your KVM and your Sun Micro
computer.
Depends on the display card settings, it’s possible that you can not see the boot
message on DVI monitor until the login window is displayed. The boot message
may display on traditional VGA channel instead.
3.6
Driver Installation
3.6.1
OS without driver installation
No driver is needed for the following operation systems.
1. Windows ME/2000/2003/XP/VISTA
2. MAC OS9/OSX
3. Linux kernel 2.3 or later
4. Sun Micro Solaris 8 or later
3.6.2
Windows 98/SE
After you connect this KVM Switch to your PC, Windows 98 will automatically
detect the device and prompt for the driver installation. Please prepare your
Windows 98 CD ready, and install the driver by following the instructions.
A. Press “Next” to Continue.
