4 Ports USB 2.0 DVI KVM Switch with HUB and Audio User’s Manual
-
12
-
4.1.5
Channel Shift Function
Switch control to previous host:
[Hot Key] + [Hot Key] + [Left Arrow]
Switch control to next host
[Hot Key] + [Hot Key] + [Right Arrow]
or
[Hot Key] + [Hot Key] + [Enter]
4.1.6
[ALT] Channel Shift Function
[ALT] channel shift function
is
OFF
by default. After
[ALT] channel shift
function
is enabled, you can press left
[ALT]
or right
[ALT]
key twice, the active
host will automatically shift to left or right one channel (channel decrease /
increase to next).
Enable/Disable [ALT] channel shift function
[Hot Key] + [Hot Key] + [ALT] + [Enter]
Switch control to previous host
[Left ALT] + [Left ALT]
Switch control to next host
[Right ALT] + [Right ALT]
4.1.7
Host Selected Indicator
The
Host Selected LED (Red LED)
on KVM front panel indicates the host port
status:
OFF:
Indicates the host port is not selected.
ON:
Indicates the host port is available and selected.
Flash:
Indicates the host port is selected but is not available
4.2
USB Hub Selection
4.2.1
USB Hub Switch by Push Button
You must enable
Hub Auto-Switch function
before you can use push button to
switch USB Hub. There are two ways to toggle
Hub Auto-Switch
alternatively
:
Press any push button on KVM front panel for 3 seconds.
By using hot key: [Hot Key] + [Hot Key] + [H]
After
Hub Auto-Switch function
is enabled, the
Hub auto-switch / Auto-Scan
Indicator
on front panel will turn
ON
statically, and USB hub can be switched
along with selection of host port by push button on front panel. The USB hub
