4 Ports USB 2.0 DVI KVM Switch with HUB and Audio User’s Manual
-
13
-
switching time is one second later after port switch, the reason to delay the USB
hub switch is to decrease USB enumeration loading if user changes active port
very fast.
4.2.2
Hot Key Switch for USB Hub Selection
If
Hub Auto-Switch function
is
disabled
, the USB hub switch is independent
from host port. You can use the following hot keys to switch USB hub to specific
port:
[Hot Key] + [Hot Key] + [Q]:
Switch USB hub to port 1
[Hot Key] + [Hot Key] + [W]
: Switch USB hub to port 2
[Hot Key] + [Hot Key] + [E]
: Switch USB hub to port 3
[Hot Key] + [Hot Key] + [R]
: Switch USB hub to port 4
If
Hub Auto-Switch function
is
enabled
, USB hub will be switched along with
selection of host port by Hot Key. In this mode, hot key
[Hot Key] + [Hot Key] +
[Q/W/E/R]
for USB hub switching are disabled.
[Hot Key] + [Hot Key] + [1]
: Switch both host and hub to port 1
[Hot Key] + [Hot Key] + [2]
: Switch both host and hub to port 2
[Hot Key] + [Hot Key] + [3]
: Switch both host and hub to port 3
[Hot Key] + [Hot Key] + [4]
: Switch both host and hub to port 4
4.2.3
Hub Selected Indicator
The
Hub Selected LED (Green LED)
on KVM front panel indicates the USB hub
selection status:
OFF:
Indicates the USB hub is not active at this port.
ON:
Indicates the USB hub is active at this port.
4.3
Audio Selection
The audio selection is always independent from host port
separately
, and you
must use the following hot keys to switch audio to specific port. There is no any
indicator for audio selection.
[Hot Key] + [Hot Key] + [Z]
: Switch audio to port 1
[Hot Key] + [Hot Key] + [X]
: Switch audio to port 2
[Hot Key] + [Hot Key] + [C]
: Switch audio to port 3
[Hot Key] + [Hot Key] + [V]
: Switch audio to port 4
