Digitus DN-95601, Руководство пользователя

Страница: 7 / 14

Netmask
Here you can change the netmask.
For the changes to get valid a restart of the firmware is required.
Gateway
Here you can change the standard gateway.
For the changes to get valid a restart of the firmware is required.
Use DHCP
Here you can set, if the unit shall get its TCP/IP settings directly from your DHCP server.
Then the device requests an IP-Adress, Netmask and a standard Gateway from this server.
If there is no DHCP server inside of your network, we recommend to deactivate this function.
For the changes to get valid a restart of the firmware is required.
Configuration - IP ACL
IP Access Control List (IP ACL) acts as an IP filter. Wether it is active hosts and subnets only can contact
the unit, if their IP addresses are stated in this IP ACL.
e.g.:
„http://192.168.0.1“ or „http://192.168.0.1/24“
If you locked yourself out by mistake, please activate the bootloader mode, start Gbl_Conf.exe and
deactivate IP ACL.
Here you can set, if the device shall react on pings.
Enable IP Filter
Here you can activate the IP Access Control List (IP ACL).
If IP ACL is active, DHCP and SNMP only work, if all necessary servers and clients are registered
in this list.
Das Bild kann nicht angezeigt werden. Dieser Computer verfügt möglicherweise über zu wenig Arbeitsspeicher, um das Bild zu öffnen, oder das Bild ist beschädigt. Starten Sie den Computer neu, und öffnen Sie dann erneut die Datei. Wenn weiterhin das rote x angezeigt wird, müssen Sie das Bild möglicherweise löschen und dann erneut einfügen.