Digitus DN-95601, Руководство пользователя

Страница: 8 / 14

Configuration - HTTP
HTTP Port
Here you can enter the HTTP port number, if necessary. Possible numbers are 1 ... 65534 (standard:
80). To get access, you have to enter the port number after the IP address of the device
, e.g.:
http://192.168.0.2:1720
For the changes to get valid a restart of the firmware is required.
Require HTTP Password
Password protected access can be activated here. In this case, a user and an admin password have to
be defined. Passwords have a maximum lengths of 15 characters.
Administrators are authorized to modify the settings. The username of the admin is
“admin” .
Users are authorized to login, but are not allowed to modify the settings. The username of the user is
“user” .
If you have forgotten your password, activate the bootloader mode, start GBL-Conf.exe and deactivate
the password request.
For the changes to get valid a restart of the firmware is required.
Check Password on start page
If activated, the user has to enter his password, before logging in to the webinterface.
Das Bild kann nicht angezeigt werden. Dieser Computer verfügt möglicherweise über zu wenig Arbeitsspeicher, um das Bild zu öffnen, oder das Bild ist beschädigt. Starten Sie den Computer neu, und öffnen Sie dann erneut die Datei. Wenn weiterhin das rote x angezeigt wird, müssen Sie das Bild möglicherweise löschen und dann erneut einfügen.