Features
Bootloader mode
To activate the boot loader mode, hold the "select" button down and plug the unit into a power grid.
To ensure that the device is in bootloader mode, you can see in the GBL_Conf.exe program window the
word "BOOT LDR" after the device's name, and the device status LED is slow the blinking.
In bootloader mode you can disable the password and IP ACL, it is possible to use the program
GBL_Conf.exe to perform a firmware update and factory settings can be restored. To exit the boot
loader mode again, restart the device without pressing the button.
Alternatively, you can leave the boot loader mode by selecting the GBL_Conf menu Device -> Enter
firmware.
Firmware update
In order to update the firmware the program GBL_Conf.exe and the latest firmware are needed.
Start the device in bootloader mode and run the program GBL_Conf.exe. On the left side of the program
window all DIGITUS
®
devices that are in the network are listed. Select the device, that should be
updated, click on Program Device Firmware Update and determine the location of the new firmware.
Please note: The up-to-date firmware and GBL_Conf.exe can be found at www.assmann.com, free to
download.
Technical information
Connections:
1 x CEE 7/4 Plug, 230 VAC, max. 16A
1 x Ethernet jack (RJ45)
Power outlets
• 7x CEE 7/4, max. 16A (
DN-95601
)
• 8x IEC C13, max. 10A
(DN-95602
)
Network:
10/100 MBit/s 10baseT Ethernet
Protocols:
TCP/IP, HTTP, SNMP v1 and v2c, SNMP traps, Syslog
Operating temperature:
0°C-50°C (non-condensing)
Dimensions:
19’’ / 1 rack unit
482,6mm x 44,5mm x 44,5mm (L x H x W)
Total weight:
~1.5 kg
Factory settings
In order to restore the default settings the device must be started in bootloader mode. Besides that the
program
GBL_Conf.exe
is required.
Run
GBL_Conf.exe
and select the device whose settings should be restored. Then click on
Program
Device -> Reset to Fab default
.
Please notice that all current settings will be deleted. The default settings will be loaded when the
firmware of the device is restarted the next time.
Support
In case of further questions, about installation or operation of the device, please have look at
www.assmann.com
or do not hesitate to contact our support (
).
Содержание DN-95601
Страница 1: ...Metering PDU Manual DN 95601 DN 95602 ...
