75
2-7-1-4 Setup procedure for ‘AP Bridge-Point to Multi-Point’:
In this mode, you can connect your wireless router with at least four wireless
routers to expand the scope of wireless network, and all clients (wired only –
AP will not accept wireless clients in this mode) of the wireless routers will think
they’re on the same physical network.
Here are descriptions of every setup items:
Band (2):
Select the band you want to use, all the wireless routers
must use the same setting.
Channel
Select the channel you want to use, all the wireless
Number (3):
routers must use the same setting.
MAC address
Input the MAC address of other wireless routers.
1 to 4 (4 - 7):
Security
Click to set security settings for this connection
Setting (8):
(Please go to section ‘2-7-3 Wireless Security’
for detailed instructions).
1
2
3
4
5
6
7
8
Содержание DN-7059-2
