Digitronic
Digital Cam Switch Unit
Automationsanlagen GmbH
CamCon DC50/51
7.4.1.6.7. RS232 measuring system
The RS232 way gathering is needed, if the measuring system used by you does not contain any of the
interfaces described in the previous chapters.
To use this system you have to select "
RS232
" in the
special measuring system menu and the following menu
is set up:
1.
First you have to enter the baud rate using the
and
keys.
2.
The data transfer protocol can be set with the
key and the
key as before.
At the moment only the data transfer protocol of a Stegmann Pomux 203BCD is available.
3.
The resolution gives the value in which the actual position of the measuring system is moving.
4.
The prescaler (predivisor) divides the resolution to enable the setting of the measuring system in
devices with lower memory.
5.
Press the
key to confirm your inputs and exit this menu.
Attention:
This measuring system may only be used on a CamCon DC50/51, since it
blocks the serial interface, making the programming via a PC or a
terminal impossible!
7.4.1.6.8. AG615 - Single - Multiturn - Measuring system
Having selected "
AG615
" in the special measuring
system-menu, the following menu appears.
The AG615 - Single - Multiturn - measuring system
creates a multiturn- i.e. ultility measuring system out of an
AAG615 - 8192 Singleturn - measuring system.
As a result several rotations i.e, turns at the Single -
Multiturn - Measuring systemCamCon per rotation of the
AG615 appear.
1.
Give in the number of rotations i.e. turns that shall be created at the CamCon first (e.g. 3).
2.
Then enter the resolution that the CamCon shall display or process per turn (e.g. 360).
3.
Confirm your inputs using the
key and leave the menu.
Excample:
For a value of 3 * 360 the CamCon will count thrice from 0 to 359 if the AAG615 encoder
does one rotation along the shaft.
,Version from: Aug. 04
Page: 52
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:[email protected]
Site web : www.hvssystem.com
