Digitronic
Digital Cam Switch Unit
Automationsanlagen GmbH
CamCon DC33/X with 8 programs
6.5. Cam programming in programming mode "1"
.
6.5.1. Selecting a program
The cam programming and the program selection are initiated as follows:
Press the
for, about 2 seconds, until the display shows e.g.:
.
means that
e.g. program 0 is currently selected. By pressing the
or the
key, you have the possibility to
select a program of 0 to 7. When the desired program number is adjusted, you can exit the 'Cam
programming' mode by pressing the
key.
6.5.2. Selecting an output
If you press the
key during program selection, you enter the mode of the cam programming. The
display shows e.g.
. This indicates that no cam has been programmed on output 1 in the
'Output selection' mode. By pressing the
key or the
key you can now select the output on which
you want to program cams.
6.5.3. Shifting the activation point
By pressing the
key you leave the 'Output selection' mode
and enter the 'Activation
point' mode
. A pressing of the
key or the
key shifts the activation point by one step.
This is done according to the following system:
A short single pressing of the
key will erase the activation point at the previously displayed preset
value, e.g. 100, and then the preset value is increased by 1, e.g. to 101. A short pressing of the
key
will lower the preset value (100 in our example) by 1 and then set a new activation point at e.g. 99.
6.5.4. Shifting the deactivation point
Pressing the
key once more leads you from the 'Activation point' mode
into the
'Deactivation point' mode
. CamCon will first search for the deactivation point of the current
cam (e.g.:
). By pressing the
or the
key the deactivation point is shifted by one step.
This is done according to the following system:
A single short pressing of the
key will set a new switching point at the previously displayed preset
value, e.g. 100. Then the preset value is increased by one, e.g. to 101. A short pressing of the
key
will lower the preset value, e.g. 100, by 1 and then delete the switching point 99. The new deactivation
point is then 99. A further pressing of the
key brings you back to the 'Output selection' mode
.
Version from: 18.06.2009
Page: 21
