Digitronic
Digital Cam Switch Unit
Automationsanlagen GmbH
CamCon DC33/X with 8 programs
6.4.8.3. Deletion of a particular cam
Task:
You want to delete the cam from 300 to 330 in program 0, on output 2.
Solution:
1.
Press the
key (for about 2 sec.), until you enter the 'Program selection' mode:
.
2.
Press the
key (for about 2 sec.), you enter the 'Output selection' mode
.
3.
Press the
key to select output 2,
. The start of the first cam found is displayed.
4.
Press the
key, you enter the 'Cam search' mode
.
5.
Press the
key, the device searches for the start of the next cam.
is displayed.
6.
Press the
key. The preselection
is displayed.
7.
Press the
key to program the activation point. The display shows
.
8.
Press the
key and keep it pressed until the display shows
.
CAUTION!
Do not keep the key pressed too long. It is best to keep the
key pressed until 320
and then adjust to 330 step by step.
9.
Press the
key. You return to the standard display.
NOTE:
By shifting the cam activation point to the cam deactivation point the programmed cam is deleted. By
shifting the activation point beyond the deactivation point deletes the range after the cam (e.g. from
330 to 350). All cams programmed in this range are deleted. A new cam will be placed between 330
and 350 when you move the activation point back to the desired position of 330 !
Version from: 18.06.2009
Page: 20
