Digitronic
Digital Cam Switch Unit
Automationsanlagen GmbH
CamCon DC33/X with 8 programs
5. Outline of the operator terminal
.
5.1. Frontview CamCon
5.2. The output display
The output display shows the current states of the outputs. If a LED is illuminated, the corresponding
output is active.
5.3. The seven-segment display
This display is divided into two ranges. The 1. and the 2. segment show the current mode of CamCon,
and the segments 3, 4 and 5 display the value pertaining to this mode.
5.4. The keyboard
The
key
serves for increasing the input values by the value one. If you keep the
key pressed for
about two seconds, the input values will increase automatically until released.
The
key
is used to reduce the input values by the value one. Keeping the
key pressed for about
two seconds will cause the input values to decrease automatically until the release of the
key.
The
key
serves for the initiation of the programming mode and/or for the modification of the input
type.
The
key
is used for the initiation of the system mode, for the selection of the system constants
and/or for selecting the outputs in the programming mode.
5.4.1. Display of position and speed
After the activation and after having left the programming modes the 7-segment display shows the
current program number and the rotatory speed in rotations/minute. By pressing the
key, the
angular position of the encoder, e.g.
is displayed. If the
key is pressed, the display will
show the current program number and the rotatory speed.
Version from: 18.06.2009
Page: 13
