Digitrax DCS210+ Скачать руководство пользователя

Страница: 31 / 32

www.digitrax.com

au moins 20 mm de séparation du corps humain en tout temps.“

CE/ C-Tick/ R-NZ /RCM etc: The DT602DE and UR93E conform to; CE and

Australia/New Zealand requirements of EN 300 328 V2.2.

The DT602 charging a BP600MH battery meets US DOE UEC requirements

Patents and Trade Secret

Digitrax uses material covered by US Patents 6,220,552, 6,275,739, 6,318,678,

6,367,742, 6,545,886, 6,513,763, 6,747,579, 6,536,716, 6,533,223, 6,533,224,

8,229,582, 8,292,237, 6,729,584 and others under non-exclusive licenses and/

or assignments from Anthony J. Ireland. Licensing for material covered by

these patents are available to other companies and individuals. Other patents

covering technology used by Digitrax are pending. Measures to protect trade

secret information are enforced.

Digitrax licenses the commercial use of LocoNet, which is trade secret tech-

nology, to other companies on a non-exclusive basis. LocoNet is copyrighted

property.

12.0 Warranty and Repair Information

Digitrax gives a one-year “no worries” warranty against manufacturing defects

and accidental customer damage on all Digitrax products. That’s it! Simple,

straightforward warranty, no tricky language!

All warranties on Digitrax products are limited to repair or replacement of

Digitrax products at the discretion of Digitrax. Except to the extent expressly

stated, there are no warranties, express or implied, including but not limited to

any warranties of merchantability or fitness for a particular purpose.

For items that are no longer covered under warranty, whenever possible we

will make repairs to units at fair and reasonable rates.

Please visit our warranty and repair page at

www.digitrax.com/warranty

for

warranty and repair information and procedures.

Digitrax, Inc. reserves the right to make changes in design and specifications,

and/or to make additions or improvements in its products without imposing

any obligations upon itself to install these changes, additions or improvements

on products previously manufactured.

Digitrax, Inc. is not responsible for unintentional errors or omissions in

this document.

Содержание DCS210+

































Результаты поиска

Содержание DCS210+

Отзывы:

Похожие инструкции для DCS210+

Бренды по названию

Популярные бренды

Digitrax DCS210+, Руководство пользователя

Результаты поиска

Содержание DCS210+

Отзывы:

Похожие инструкции для DCS210+

Бренды по названию

Популярные бренды