Digitrax DCS210+ Скачать руководство пользователя

Страница: 30 / 32

www.digitrax.com

11.0 FCC/Regulatory Information

FCC

: UR93, DT602D and DT602DE contain FCC Module ID: LV3RF28

Declaration of Conformity: “This device complies with part 15 of the FCC

Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any inter-

ference received, including interference that may cause undesired operation.”
“This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between

the equipment and receiver. Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected. Consult the dealer or an

experienced radio/TV technician for help.”
OEM RF28 Manufacturer/Responsible Party: Digitrax Inc., 2443 transmitter

Rd, Panama City, FL 32404, USA. (850) 872 9890. Model: RF28

“Changes or modifications not expressly approved by Digitrax Inc., the party

responsible for original RF28 Certification compliance under 47 CFR15.212,

could void the user’s authority to operate the equipment”

Canada ISED

RSS: Contains Canadian ID module: IC:3015A-RF28

This device complies with Industry Canada’s licence-exempt RSS’s. Operation

is subject to the following two conditions: (1) This device may not cause inter-

ference; and (2) This device must accept any interference, including interfer-

ence that may cause undesired operation of the device.”
“Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux

appareils radio exempts de licence. L’exploitation est autorisée aux deux con-

ditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’appareil

doit accepter tout brouillage radioélectrique subi, même si le brouillage est sus-

ceptible d’en compromettre le fonctionnement.”
RF28 RF Exposure Guidance: “In order to comply with FCC / ISED RF

Exposure requirements, this device must be installed to provide at least 20 mm

separation from the human body at all times.” “Afin de se conformer aux exi

gences d’exposition RF FCC / ISED, cet appareil doit être installé pour fournir

Содержание DCS210+

































Результаты поиска

Содержание DCS210+

Отзывы:

Похожие инструкции для DCS210+

Бренды по названию

Популярные бренды

Digitrax DCS210+, Руководство пользователя

Результаты поиска

Содержание DCS210+

Отзывы:

Похожие инструкции для DCS210+

Бренды по названию

Популярные бренды