DigiTech JamMan SOLO XT Скачать руководство пользователя | Manualshive

Страница: 2 / 72

background image

WARNING FOR YOUR PROTECTION READ THE FOLLOWING:

KEEP THESE INSTRUCTIONS

HEED ALL WARNINGS

FOLLOW ALL INSTRUCTIONS

THE APPARATUS SHALL NOT bE ExPOSED TO DRIPPING OR SPLASHING LIqUID AND NO ObjECT FILLED WITH LIqUID, SUCH AS vASES, SHALL bE PLACED ON THE

APPARATUS

CLEAN ONLY WITH A DRY CLOTH.

DO NOT bLOCK ANY OF THE vENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS.

DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOvES, OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT PRODUCE HEAT.

ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED bY THE MANUFACTURER.

UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades

and a third grounding prong. The wide blade or third prong are provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of

the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

MAINS DISCONNECT:

The plug shall remain readily operable. For rack-mount or installation where plug is not accessible, an all-pole mains switch with a contact separation of at

least 3 mm in each pole shall be incorporated into the electrical installation of the rack or building.

«
1
2
3
4
...
»

Содержание JamMan SOLO XT









































































Отзывы:

Нет отзывов

Похожие инструкции для JamMan SOLO XT

Бренд: Engl Страницы: 24

PH-2 Super Phaser

Бренд: Boss Страницы: 6

Бренд: DAPAudio Страницы: 21

Бренд: IMG STAGELINE Страницы: 24

Бренд: IMG STAGE LINE Страницы: 26

Бренд: DW Страницы: 2

Бренд: Rane Страницы: 28

DJControl Compact

Бренд: Hercules Страницы: 18

Parasite Antifilter

Бренд: flight of harmony Страницы: 17

Бренд: Gemini Страницы: 6

Бренд: AMT Страницы: 15

Бренд: AMT Страницы: 20

Бренд: T-Rex Страницы: 5

Бренд: AUDIO TELEX Страницы: 4

Бренд: Mad Bean Pedals Страницы: 7

Бренд: Raven Labs Страницы: 6

Бренд: Raven Страницы: 72

Бренд: Starr Labs Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды