Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.7: 23 April, 2014 (SGX-1920_manual.doc)
Page
64 of 70
Appendix X - Inverter Interface Board P/N 416040010-3
[OPERATE UNDER 12VDC POWER INPUT ENVIRONMENT]
The Inverter interface board provides interface to drive up the high current
consumption panel inverter in excess of 3.5A. This board enables current of up to 8
Amps to be managed safely while retaining the capability for inverter dimming and
management of the inverter enable signal according to VESA DPMS standards.
Additionally, the inverter interface board provides over-voltage protection via a
resettable fuse when the input voltage exceeds 13V and reverse polarity protection
against accidental misconnection.
Connector Type :
CNA1, CNB2 : JST 4 ways, B4B-XH-A
CNB1 : JST 5 ways, B5B-XH-A
CNB3 : JST 8 ways, B8B-XH-A
PP1 : PWR 4 way
PP2 : Terminal Block 2 poles x 2
PP3 : PWR 2 ways
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from