Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.7: 23 April, 2014 (SGX-1920_manual.doc)
Page
3 of 70
SYSTEM DESIGN
A typical LCD based display system utilizing this controller is likely to comprise the following:
Summary:
1. LCD
panel
2.
LCD controller card, SGX-1920
3.
LCD signal cable (use for LVDS panel)
4.
Inverter for backlight (if not built into LCD)
5. Inverter
cable
6.
Function controls
7.
Function controls cable
8.
Status LED (optional)
9.
IR sensor (optional)
10. RS-232 control interface
11. Second RS-232 control interface
12. External panel power output
13. Panel control signal
14. Audio add-on board (optional)
15. Aux5VDC, max 500mA output
16. Ambient light sensor connection
17. Backlight status input
18. Auxiliary Video input
19. Auxiliary Digital Input Port – HD1
20. Auxiliary Digital Input Port – HD2
21. Reserved
22. HDMI Audio output
23. SPDIF Audio output
24. DVI-D
input
25. HDMI
input
26. Analog RGB input
27. Control over network connection
28. +12V / +24V DC power input
29. External panel power input
Digital View provides a range of parts, such as listed above, to make up complete display solutions.
Downloaded from
Downloaded from
Downloaded from
