FUNCTION SETUP > GROUP SETUP
OSD -
>
>
Press Near/Enter Key
Press Far Key
[ :MOVE CURSOR]
[ : CHANGE VAL.]
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
PATTERN
1
00:0
3
1
2 NONE
3
NONE
4
NONE
5
NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
PATTERN
1
00:0
3
1
2 NONE
3
NONE
4
NONE
5
NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
[NEAR:EDIT ACT]
[FAR :EDIT END]
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
PATTERN
1
00:0
3
1
2 NONE
3
NONE
4
NONE
5
NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
8
6
7
8
EDIT GROUP - Selects Function Sequence
After finishing setting up an ‘ACTION’, press near or enter key
to one-upper-level menu. Move cursor up/down to select
‘ACTION NO.’ and repeat to step 4 ~ step 6 to edit the selected
group.
EDIT GROUP - Saves the Setting
After finishing setting up all actions, press far key to exit.
Then cursor should be moved to ‘SAVE’. Press near or enter
key to save the data.
6
4
7
Note: to properly setup a group for the camera, be sure to have at least 2 Presets,
1 Scan, and 1 Patter setup.
31