Installation Using Wall Mount Bracket (Option)
Installation -
Rubber Gasket
Rubber Gasket
2
1
2
1
5
3
4
6
7
Drilling a Hole on the Wall and Fixing the Anchor
Bolts
To install the wall mount bracket, drill four holes
(6mm diameter/50mm depth) on the wall and insert
the anchor bolts into the hole.
Fixing the Wall Mount Bracket
1. Drill a hole (20mm diameter) on the pipe of the bracket
to pass the cables.
2. On the fixed anchor bolts, attach the rubber gasket
and screw the wall mount bracket.
Drilling a Hole on the Wall
To pass cables to the wall, drill a hole (30mm
diameter) on the wall.
Fixing the Wall Mount Bracket
Pass the cables into the wall mount bracket, and
screw the wall mount bracket to the wall.
Fixing the Surface Mount Bracket
Pass the cables through the hole of the surface mount
bracket, screw the surface mount bracket to the wall
mount bracket.
Connecting the Cables to the Terminal Block
See the section ‘Cabling the Terminal Block’ for details.
Connecting the Terminal Block
Put the terminal block connected to the cables in the
slot of the main body.
Fixing the Main Body
Screw the main body to the surface mount bracket by
screwing 4 lock-up screws.
Detaching the Protection Film
Detach the protection film from the dome cover after
finishing all installation.
1. Installing on the Concrete Wall
2. Installing on the Wooden Wall
Disassemble the main body with the surface mount
before installation the camera.
Connecting the Cables
to the Terminal Block
Connecting the
Terminal Block
Fixing the Main Body
Fixing the Surface
Mount Bracket
Fixing the Wall
Mount Bracket
Detaching the
Protection Film
Drilling a Hole on the
Wall and Fixing the
Anchor Bolts
1
2
3
4
6
7
5
13