Installation Using Wall Mount Bracket and
Sunshield Dome (optional)
Installation -
2
5
6
9
8
7
3
1
Passing the Cables
through the Wall
Mount Bracket
Fixing the
Junction Box
Fixing the Sunshield Mount
Connecting the Cables to the
Terminal Blocks
Connceting the other Clables
Fixing the Main Body
Detaching the Protection Film
Drilling a Hole on the
Wall and Fixing the
Anchor Bolts
4
Closing junction Box
Cover
2
1
2
1
5
3
4
6
7
Drilling a Hole on the Wall and Fixing the Anchor
Bolts
To install the wall mount bracket, drill four holes
(6mm diameter/50mm depth) on the wall and insert
the anchor bolts into the hole.
Fixing the Wall Mount Bracket
1. Drill a hole (20mm diameter) on the pipe of the bracket
to pass the cables.
2. On the fixed anchor bolts, attach the rubber gasket
and screw the wall mount bracket.
Drilling a Hole on the Wall
To pass cables to the wall, drill a hole (30mm
diameter) on the wall.
Fixing the Wall Mount Bracket
Pass the cables into the wall mount bracket, and
screw the wall mount bracket to the wall.
Passing the Cables
Pass the cables through the wall mount bracke.
Closing the Junction Box
Once the wall mount bracket is secured to the wall,
attach the cover to the junction box and secure tightly.
Fix the Sunshield Mount
Pass the cables through the hole of the sunshield mount,
fix the sunshield mount to the wall/ceiling bracket.
Connecting the Cables to the Terminal Block
See the section ‘Cabling the Terminal Block’ for details.
Connecting the Terminal Block
Put the terminal block connected to the cables in the
slot of the main body.
Fixing the Main Body
Screw the main body to the surface mount bracket by
screwing 4 lock-up screws.
Detaching the Protection Film
Detach the protection film from the dome cover after
finishing all installation.
1. Installing on the Concrete Wall
2. Installing on the Wooden Wall
Disassemble the main body with the surface mount
before installation the camera.
8
9
16