Rev C August 2009
Page 4.25
Digital Projection
TITAN sx+600/700.
User Manual
4. Controlling the projector
Notes
Horizontal and Vertical
Aspect Ratio
adjustments are
available only when
User
is
selected in
Aspect Ratio
, (see
previous page).
Keystone
adjustment can be
found in both the Geometry and
Projector Setup menus.
Phase
adjustment can be
found in both the Picture and
Geometry menus, and is
available for graphics based
RGB sources only.
User Horizontal Aspect Ratio
Press
and
to select User H Aspect.
Press
and
to adjust the slider (internal number – adjust to fit).
User Vertical Aspect Ratio
Press
and
to select User V Aspect.
Press
and
to adjust the slider (internal number – adjust to fit).
Keystone
Used to correct for distortion caused by the projector being mounted higher or lower
than the screen.
Press
and
to select Keystone.
Press
and
to adjust the slider (-128 to +127).
Phase
Phase should be set automatically by the projector, but can be adjusted manually to
correct for shimmering or poor quality definition on, for example, fine text.
Press
and
to select Phase.
Press
and
to adjust the slider (0 to 32).
•
•
•
•
Geometry menu continued
Downloaded From projector-manual.com Digital Projection Manuals
