Page 4.12
Rev C August 2009
4. Controlling the projector
Digital Projection
TITAN sx+600/700.
User Manuall
Notes
For more information about
input modes and input presets,
see earlier in this section,
Input
modes and settings
.
See also
Input menu
, later in
this section.
A preset can be applied only to
the same mode for which it was
created. If the detected input
mode does not match, then
settings from the mode history
or mode library will be applied.
For more information about
input modes, see
Input modes
and settings
. earlier in this
section.
The lens settings, ie Focus
position, Zoom position and
Shift, are included only for the
first ten presets.
Input Presets
recall
To recall a set of modal and lens settings that have been saved, press and hold
, whilst pressing the lettered key
A – S.
The projector will switch to the saved input source, and redetect the input mode
before applying the saved modal and lens settings.
Save
To save the current input source, modal and lens settings, press and hold
,
whilst pressing the lettered key
A – S.
If this Preset has been used before, and the Input source has been changed,
then the following message will be displayed.
Press
and
to select either OK or Cancel.
Press
to confirm your selection.
The settings will be saved to the selected preset, and the following message will
be displayed.
•
•
•
•
•
•
Downloaded From projector-manual.com Digital Projection Manuals
