Rev C August 2009
Page 4.29
Digital Projection
TITAN sx+600/700.
User Manual
4. Controlling the projector
Notes
Read the notes on Colour and
Global Colourimetry earlier
in this section before making
any settings in the Colour
menus.
Note that any changes made
in the
Global Colourimetry
menu
(see Setup Menu, later
in this section) will affect ALL
inputs, modes and presets for
which
Global Mode
has been
selected in the
Colour menu
.
The
Colour Temperature
slider is available only if
Temperature
Mode is selected.
The
RGB Lift and Gain
sliders
are available only if
User
Mode
is selected.
The
Component Type
selection is available for RGB1
and Component inputs only.
Colour Mode
Press
and
to select Colour Mode.
Press
and
to select from:
Global
Temperature
User
Peak
Video
Film
Graphic
ColorMAX User 1
ColorMAX User 2
Colour Temperature
Press
and
to select Temperature.
Press
and
to adjust the slider (3,000K to 10,000K. in 100 steps).
RGB Lift
Press
and
to select the parameter to be adjusted.
Press
and
to adjust the slider.
RGB Gain
Press
and
to select the parameter to be adjusted.
Press
and
to adjust the slider.
Component Type
Press
and
to select Component Type.
Press
and
to select from:
RGB
YPrPb
•
•
•
•
•
Colour menu continued
Downloaded From projector-manual.com Digital Projection Manuals
