Digital Projection
Titan Laser Series
Rev A January 2019
Page 24
Important Information
Selecting an input signal
1. Connect one or more image sources to the projector.
2. Select the input you want to display:
•
Press one of the input buttons on the remote control.
•
Alternatively, open the On-screen display (OSD) by pressing
MENU
. Highlight
Input
from the
main menu, press
ENTER/OK
and then select an input signal using the
UP
and
DOWN
arrow
buttons. Press
ENTER/OK
to confirm your choice.
Selecting a test pattern
To display a test pattern:
•
Press
TEST
on the remote control. If necessary, press again to change the test pattern. Test
patterns are displayed in the following order:
Off, White, Black, Red, Green, Blue, CheckerBoard, CrossHatch, V Burst, H Burst,
ColorBar, Pluge
After the final test pattern, the projector exits test pattern mode and returns to the main image. To
view test patterns again, you need to press
TEST
again.
•
Alternatively, open the OSD by pressing
MENU
. Highlight
Test Patterns
from the main menu,
then select a test pattern using the
LEFT
and
RIGHT
arrow buttons.
