Digital Projection
Titan Laser Series
Rev A January 2019
Page 17
Important Information
Four eye-bolts are fitted to the top of the projector to enable the flying of the projector using steel wire
or chains.
This system should only be used to fly a single projector. Do not stack projectors and
fly them together.
Point-to point connections
Refer to the following guidelines when connecting one end of a suspension cable directly to an eye-
bolt and the other to a suspension point.
•
The suspension cables can be connected to the eye-bolts
at an angle of up to 45° around the eye ring.
•
The suspension cables must not be connected to the
eye-bolts at any angle across the eye ring.
•
The suspension cable must run vertically up from the
projector.
Examples of correct
configurations:
Example of an incorrect configuration
1
2
1
2
45°
45°
