Digital Projection
Titan Laser Series
Rev A January 2019
Page 16
Important Information
Stacking and rigging
The top of the projector has pins and the bottom of the projector has cups. The pins and cups can
connect together and be locked into place with a locking pin.
This system should only be used to stack a
maximum two projectors.
1. Remove the adjustable feet from the projector
that will be stacked on the top.
1
2. Mount the projector on top of the other projector.
Ensure that all four cups are placed over the pins
on the bottom projector.
2
3. Push the locking pins into place on each cup and
pin.
3
A mouting rail may also be fitted using the pin and cup
system. This is an optional accessory to the projector.
It can be used with commercially available rigging truss
clamps to attach the projector to a staging or lighting
truss.
Only qualified riggers should make this
installation after careful consideration of the
strength and safety of the truss.
2
1
3
