Digital Projection M-Vision Cine 400 3D series, Руководство пользователя

Страница: 45 / 58

Digital Projection
M-Vision Cine 400 3D series
A TOUR OF THE MENUS Operating Guide
Revision C, July 2014
Control menu
● Triggers
Choose from Screen , 16:9 , TheaterScope , 4:3 , 4:3 Narrow or RS232
to determine what will activate each trigger.
● Auto-Source
If this setting is
On
, the projector will cycle the inputs until a source is
detected.
● Infrared Remote
This setting switches the infrared sensors on and off.
Service menu
Factory Reset
To restore the factory default settings:
1. Navigate to
Factory Reset
and press ENTER / SELECT .
2. When prompted, use the
LEFT
and
RIGHT
arrow buttons to
highlight the Yes button and then press
ENTER
/
SELECT
to confirm
your choice.
Test patterns
Highlight this setting and then use the
LEFT
and
RIGHT
arrow buttons
to switch between the various patterns.
Notes
If you turn the remote control off,
you can only turn it back on again
from the control panel.
Test patterns are not available in
3D mode.
Trigger 2
CONTROL >>
Trigger 1 Screen
16:9
Auto-Source Off
Infrared Remote On
Op-15
Model Name
SERVICE >>
Factory Reset <Execute>
Serial Number
Software Version
Active Source
Signal Format
Pixel Clock
Refresh Rate
Lamp Hours
M-Vision 400 3D
C932XXXXX00238
MD07-GE07-00011-010203
HDMI 2
1080p/60Hz TAB
148.50 MHz
H: 67.25 KHz V: 60Hz
18 HRS
Test Pattern Off
Reset Everything
Yes No