Digital Projection M-Vision Cine 400 3D series, Руководство пользователя

Страница: 38 / 58

Digital Projection
M-Vision Cine 400 3D series
A TOUR OF THE MENUS Operating Guide
Revision C, July 2014
Main menu continued from previous page
3D Control
Use this sub-menu to enable, disable and set up 3D input, as follows:
● 3D Format — Off , Auto (recommended), Side by Side , Top and
Bottom , Dual Pipe
● DLP Link — On (if you are using 3D glasses that can utilise the DLP
Link® signal embedded in the image) and Off
● 3D Swap — Normal and Reverse (set to Reverse if the 3D images
are displayed in the wrong order)
● Dark Time — 1ms , 1.5ms , 2ms and 2.5ms . Set to reduce the effect of
images overlapping whilst the glasses are switching
● Sync Delay — use the
LEFT
and
RIGHT
arrow buttons to set the
value in milliseconds, to compensate for signal processsing delays in
the projector.
● 1080p24 3D Display — if you set this to 144 Hz , 30 lines are cropped
from the top and bottom of the frame; 96 Hz displays the full frame.
Notes
For a list of supported 3D formats,
see the
Connection Guide
.
3D video is only possible on the
HDMI inputs.
Most of the 3D Control settings
will be unavailable if 3D Format
is set to Auto and the projector is
not receiving a 3D image from the
source.
DLP Link is only supported at
96 Hz.
The Frame Packing format is
automatically detected by the
projector.
Op-08
L R
L
R
Side by Side
Top and Bottom
Dual Pipe
HDMI 1
HDMI 2
L
R